CE Certification Discount Cast Iron Grate Bar Factories - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia
CE Certification Discount Cast Iron Grate Bar Factories - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia Detail:
1. Casting process: Shell mold precision casting
2. Steel grade: GX130CrSi29(1.4777) ( Also can be as your requirement)
3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8
4. Geometrical Tolerance of cast: DIN EN ISO 8062 – grade GCTG 5
5. Application: Waste to energy incineration plants.
Garbage disposal is now a very serious global problem. Trash to energy is the currently most reasonable treatment. In recent years, many countries with strong economic strength have begun to pay attention to this point. A lot of money has been invested in the construction of waste incineration power plants. This has not only brought great improvement to our environment. At the same time, it has brought us great economic benefits.
As shown in the figure, grate bars play an important role in waste incineration. In high temperature and very harsh environment, Low quality grate will greatly affect the efficiency of waste incineration, and its service life is very short. You need to replace it very often.
However, with over 10 years casting experience, we can solve the problems for you.
Steel Grade we usually use. (It can also be as your requirements.)
Chemical composition % of steel GX130CrSi29 (1.4777): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
1.2 – 1.4 |
1 – 2.5 |
0.5 – 1 |
max 1 |
max 0.035 |
max 0.03 |
27 – 30 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi27-4 (1.4823): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 1.5 |
3 – 6 |
max 0.04 |
max 0.03 |
25 – 28 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi25-20 (1.4848): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 2 |
19 – 22 |
max 0.04 |
max 0.03 |
24 – 27 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi25-12 (1.4837): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 2 |
11 – 14 |
max 0.04 |
max 0.03 |
24 – 27 |
max 0.5 |
| Mechanical properties(ASTM A297 Grade HH)1.4837 | UTS: Min 75 Ksi/515 Mpa |
| YS: Min 35 Ksi/ 240 Mpa | |
| Elongation: in 2 in: Min 10 % | |
| Hardness: Min 200 BHN (3 places on speciment)” | |
| Microstructure/Metallography | Predominantly Austenitic structure containing dispersed carbides |
| SoundnessTest/X-ray or UT | RT per ASTM E446 Level II |
| UT per ASTM A609 Level II | |
| NDT/LPI or MPI | MPI as per ASTM E709/E125 LEVEL II |
| LPI as per ASTM E165 Level II” | |
| Final Visual Inspection | ASTM A802 Level II |
| Package | Iron case or Wooden case. |
Our Main Market Are
OEMs and engineering companies
Waste to Energy plants
Operating companies
Biomass units
Coal-fired power plants
Service companies for maintenance operations
Different kinds of OEM grate bars
Well finished grate bars
Mature Process And Strict Quality Control Is Why will you choose us
For more inquiries or technical questions, please contact XTJ Service Team. We will provide the most reasonable technical solution and the best quotation according to your product.
Product detail pictures:
Related Product Guide:
To consistently enhance the management method by virtue of the rule of "sincerely, fantastic religion and top quality are the base of business development", we extensively absorb the essence of associated goods internationally, and constantly acquire new merchandise to satisfy the needs of shoppers for CE Certification Discount Cast Iron Grate Bar Factories - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia , The product will supply to all over the world, such as: Wellington, Germany, Mauritius, As the world economic integration bringing challenges and opportunities to the xxx industry, our company , by carrying on our teamwork, quality first, innovation and mutual benefit, are confident enough to supply our clients sincerely with qualified merchandise, competitive price and great service, and to build a brighter future under the spirit of higher, faster, stronger with our friends together by carrying on our discipline.
By Nicole from Houston - 2017.12.09 14:01
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Debby from Hongkong - 2017.02.28 14:19
Related products
-
CE Certification Discount Iron Ore Crusher Mach...
1. Casting process: Shell mold precision casting 2. Steel grade: 1.4777 1.4823 1.4837 1.4848 3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8 4. Geometrical Tolerance of cast: DIN EN ISO 8062 – grade GCTG 5 5. Application: Wear Parts on pallet cars and sinter cars. We are the leading supplier to pallet cars and sinter cars manufacturers and the large steel mills. With over 10 years’ casting experience, these resistant parts produced by us always have good mechanical...
-
High Quality OEM Guiding Wheel Manufacturers -...
Casting process: Centrifugal casting Machining Process: OEM We supply a broad range of ferrous metals for steel mill wear parts that provide high uniform strength in all directions. We cast ductile iron, ADI, CADI, Ni-Resist, Ni-Hard, and compacted graphite, also gray iron and many other metals. XTJ also develops custom and proprietary alloys for steel mill wear parts, and we have the capability to meet specific requirements for micro structure and other physical properties. We work with the ...
-
CE Certification Discount Wear Parts Of Sinter ...
Heat resistant castings are typically made out of stainless steels that have a high Chromium and Nickel count. Castings made out of heat resistant alloys are excellent for components exposed to dry gases at high temperatures for long periods of time. Industries that benefit from heat resistant castings include Energy, Engines, Furnaces/Ovens, and Petrochemical. Heat resistant steel castings are also referred to as oxidation resistant steel castings, refractory steel castings, heat resistant...
-
China Wholesale Vacuum Furnace Plate Factories ...
1. Cast process: Investment casting 2. Steel Grade: As your requirement 3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8 4. Geometrical Tolerance of cast: DIN EN ISO 8062 – grade GCTG 5 XTJ provides the right solution corresponding to your needs, it includes: 1. Standard products for the most common types of furnaces worldwide like Base Trays, Intermediate Grids, Baskets etc., 2. Customized solution designed to the customer’s requirements. Customized fixtures are de...
-
High Quality OEM Comb Sieve Plate Exporters - ...
As We have supplied many pellet plants for many years, our casting and machining processes have been very mature. In recent years, almost no customer complaints have been received. If you have any demand, please contact our team. We will give you professional solution. The material we use on these parts are usually heat resistant steels. Heat resistant is the material with high strength and stability used at high temperature. It is often used in industries and fields such as metallurgy, heat ...
-
China Wholesale Steel Mill Rolls Companies - F...
Casting process: Centrifugal casting Machining Process: OEM We supply a broad range of ferrous metals for steel mill wear parts that provide high uniform strength in all directions. We cast ductile iron, ADI, CADI, Ni-Resist, Ni-Hard, and compacted graphite, also gray iron and many other metals. XTJ also develops custom and proprietary alloys for steel mill wear parts, and we have the capability to meet specific requirements for micro structure and other physical properties. We work with the ...
