China Wholesale Waste Management Castings Manufacturers - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia
China Wholesale Waste Management Castings Manufacturers - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia Detail:
1. Casting process: Shell mold precision casting
2. Steel grade: GX130CrSi29(1.4777) ( Also can be as your requirement)
3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8
4. Geometrical Tolerance of cast: DIN EN ISO 8062 – grade GCTG 5
5. Application: Waste to energy incineration plants.
Garbage disposal is now a very serious global problem. Trash to energy is the currently most reasonable treatment. In recent years, many countries with strong economic strength have begun to pay attention to this point. A lot of money has been invested in the construction of waste incineration power plants. This has not only brought great improvement to our environment. At the same time, it has brought us great economic benefits.
As shown in the figure, grate bars play an important role in waste incineration. In high temperature and very harsh environment, Low quality grate will greatly affect the efficiency of waste incineration, and its service life is very short. You need to replace it very often.
However, with over 10 years casting experience, we can solve the problems for you.
Steel Grade we usually use. (It can also be as your requirements.)
Chemical composition % of steel GX130CrSi29 (1.4777): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
1.2 – 1.4 |
1 – 2.5 |
0.5 – 1 |
max 1 |
max 0.035 |
max 0.03 |
27 – 30 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi27-4 (1.4823): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 1.5 |
3 – 6 |
max 0.04 |
max 0.03 |
25 – 28 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi25-20 (1.4848): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 2 |
19 – 22 |
max 0.04 |
max 0.03 |
24 – 27 |
max 0.5 |
Chemical composition % of steel GX40CrNiSi25-12 (1.4837): EN 10295-2002
|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
|
0.3 – 0.5 |
1 – 2.5 |
max 2 |
11 – 14 |
max 0.04 |
max 0.03 |
24 – 27 |
max 0.5 |
| Mechanical properties(ASTM A297 Grade HH)1.4837 | UTS: Min 75 Ksi/515 Mpa |
| YS: Min 35 Ksi/ 240 Mpa | |
| Elongation: in 2 in: Min 10 % | |
| Hardness: Min 200 BHN (3 places on speciment)” | |
| Microstructure/Metallography | Predominantly Austenitic structure containing dispersed carbides |
| SoundnessTest/X-ray or UT | RT per ASTM E446 Level II |
| UT per ASTM A609 Level II | |
| NDT/LPI or MPI | MPI as per ASTM E709/E125 LEVEL II |
| LPI as per ASTM E165 Level II” | |
| Final Visual Inspection | ASTM A802 Level II |
| Package | Iron case or Wooden case. |
Our Main Market Are
OEMs and engineering companies
Waste to Energy plants
Operating companies
Biomass units
Coal-fired power plants
Service companies for maintenance operations
Different kinds of OEM grate bars
Well finished grate bars
Mature Process And Strict Quality Control Is Why will you choose us
For more inquiries or technical questions, please contact XTJ Service Team. We will provide the most reasonable technical solution and the best quotation according to your product.
Product detail pictures:
Related Product Guide:
The very rich projects management experiences and one to one service model make the high importance of business communication and our easy understanding of your expectations for China Wholesale Waste Management Castings Manufacturers - Cast steel grate bars, wear parts of waste to energy furnace – Xingtejia , The product will supply to all over the world, such as: US, Portugal, Georgia, Till now, the items list has been updated regularly and attracted clients from around the globe. Comprehensive facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are likely to help you get thorough acknowledge about our goods and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
By Judy from Turkmenistan - 2018.02.04 14:13
On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
By Helen from Portland - 2018.09.29 13:24
Related products
-
China Wholesale Coal Mill Resistant Castings Su...
1. Casting process: Resin sand mold casting or Shell mold precision casting 2. Material: ASMT A 128 manganese, ASTM A 532 Chrome white iron, and fused chrome white irons 3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8-10 4. Geometrical Tolerance of cast: DIN EN ISO 8062 – grade GCTG 5-8 XTJ is a leading supplier of cast, and fabricated wear solutions to OEM and aftermarket crusher operators. We have over 12 years’ experience supplying crushing wear parts to globa...
-
High Quality OEM Roll Rings Manufacturers - Fu...
Casting process: Centrifugal casting Machining Process: OEM We supply a broad range of ferrous metals for steel mill wear parts that provide high uniform strength in all directions. We cast ductile iron, ADI, CADI, Ni-Resist, Ni-Hard, and compacted graphite, also gray iron and many other metals. XTJ also develops custom and proprietary alloys for steel mill wear parts, and we have the capability to meet specific requirements for micro structure and other physical properties. We work with the ...
-
CE Certification Discount Steel Mill Rolls Fact...
Guide roller is the main consumption tool of high-speed wire rod mill, which requires high wear resistance, steel sticking resistance and thermal fatigue resistance. Ordinary austenitic heat-resistant steel, martensite wear-resistant steel or wear-resistant cast iron guide roller can not meet the above requirements. Their service life are short, which reduces the operation rate of the mill. Cemented carbide guide roller has good wear resistance and high temperature stability, good ...
-
CE Certification Discount Chain Link Suppliers ...
Heat resistant castings are typically made out of stainless steels that have a high Chromium and Nickel count. Castings made out of heat resistant alloys are excellent for components exposed to dry gases at high temperatures for long periods of time. Industries that benefit from heat resistant castings include Energy, Engines, Furnaces/Ovens, and Petrochemical. Heat resistant steel castings are also referred to as oxidation resistant steel castings, refractory steel castings, heat resistant...
-
China Wholesale Investment Cast Alloy Steel Pro...
Buy XTJ’s high quality alloy refiner plates Keep reducing your manufacturing cost with Parason Latest Technology Refiner Plates. It help’s to Increase output, uniform and consistently produce high quality of pulp. XTJ Finedge Curved Bar refiner plates are special cast in own foundry provide uniform hardness throughout. The plates will wear uniformly over a time and have a longer bar length. The flow of pulp follows the grooves between the bars results in longer residence time. Th...
-
China Wholesale Stainless Steel Prooducts - Pu...
Buy XTJ’s high quality alloy refiner plates Keep reducing your manufacturing cost with Parason Latest Technology Refiner Plates. It help’s to Increase output, uniform and consistently produce high quality of pulp. XTJ Finedge Curved Bar refiner plates are special cast in own foundry provide uniform hardness throughout. The plates will wear uniformly over a time and have a longer bar length. The flow of pulp follows the grooves between the bars results in longer residence time. Th...
