• Tube Shields

Tube Shields

Short Description:

Stainless Steel Tube Shield, Hanger Strip

1. Process:Stamping or Casting

2. Material: SS310S, SS309S, SS304, SS321 and etc.

The tube shields are mainly used on the windward side of heating surface pipes such as superheater, reheater, economizer and water wall pipe of boiler, and also on the induced draft fan.Its main function is to protect the wind surface of boiler pipe, reduce pipe wear and increase the service life of heating surface pipe.Tube Shield is a special accessory for boiler, which is mostly used in power station boiler, but less used in small boiler, and also used in some coal chemical industry.

Product Detail

Key Words

The service life of tube shields is has a great relationship with the selected material. Generally, high quality tube shields such as 310S have a longer service life. The normal service life of tube shield is an overhaul cycle (3-5 years). Generally, the boiler will replace or add some parts every time it is overhauled. The main parts to be replaced are those with serious wear, thinning and exceeding the standard. And also which fall off during the operation of the boiler, because the installation is not fire. During replacement, according to the wear condition of the anti-wear pad, if the thinning is serious, it needs to be replaced, if the deformation is serious, and it can not protect the pipe, it also needs to be replaced. In addition, some boiler tubes are not equipped with anti-wear pads, but it is found that the tubes are worn and thinned during the regular inspection of the boiler. Usually, anti-wear pads are also installed to prevent further wear of the tubes and cause serious consequences such as boiler tube burst.


U-type resistant shield


Cast Straight And U-type resistant shields

Both cast and pressure machine anti-wear shields are often used in power plants to protect boiler pipes from damage. Each has its own advantages. The pressure machine tube shields have low manufacturing cost and a short production cycle. The cast tube shields have better wear resistance.


Well packed tube shields

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Furnace rolls, Alloy cast steel roll, Radiant tube

      Furnace rolls, Alloy cast steel roll, Radiant tube

      Casting process: Centrifugal casting Machining Process: OEM We supply a broad range of ferrous metals for steel mill wear parts that provide high uniform strength in all directions. We cast ductile iron, ADI, CADI, Ni-Resist, Ni-Hard, and compacted graphite, also gray iron and many other metals. XTJ also develops custom and proprietary alloys for steel mill wear parts, and we have the capability to meet specific requirements for micro structure and other physical pr...

    • Trash incineration Furnace grate Stove grate

      Trash incineration Furnace grate Stove grate

      Heat resistant castings are typically made out of stainless steels that have a high Chromium and Nickel count. Castings made out of heat resistant alloys are excellent for components exposed to dry gases at high temperatures for long periods of time. Industries that benefit from heat resistant castings include Energy, Engines, Furnaces/Ovens, and Petrochemical. Heat resistant steel castings a...

    • Pulp Mill Refiner plates

      Pulp Mill Refiner plates

      Buy XTJ's high quality alloy refiner plates Keep reducing your manufacturing cost with Parason Latest Technology Refiner Plates. It help's to Increase output, uniform and consistently produce high quality of pulp. XTJ Finedge Curved Bar refiner plates are special cast in own foundry provide uniform hardness throughout. The plates will wear uniformly over a time and have a longer bar length. The flow of pulp follows the grooves between the bars results in longer resid...

    • CRUSHER LINERS Ball Mill Liners

      CRUSHER LINERS Ball Mill Liners

      1. Casting process: Resin sand mold casting or Shell mold precision casting 2. Material: ASMT A 128 manganese, ASTM A 532 Chrome white iron, and fused chrome white irons 3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8-10 4. Geometrical Tolerance of cast: DIN EN ISO 8062 - grade GCTG 5-8 XTJ is a leading supplier of cast, and fabricated wear solutions to O...

    • Cast Alloy Guide Rollers, Guide ring/wheels

      Cast Alloy Guide Rollers, Guide ring/wheels

      Guide roller is the main consumption tool of high-speed wire rod mill, which requires high wear resistance, steel sticking resistance and thermal fatigue resistance. Ordinary austenitic heat-resistant steel, martensite wear-resistant steel or wear-resistant cast iron guide roller can not meet the above requirements. Their service life are short, which reduces the operation rate of the mill. ...

    • Cast steel grate bars, wear parts of waste to energy furnace

      Cast steel grate bars, wear parts of waste to e...

      1. Casting process: Shell mold precision casting 2. Steel grade: GX130CrSi29(1.4777) ( Also can be as your requirement) 3. Dimensional Tolerance of cast: DIN EN ISO 8062-3 grade DCTG8 4. Geometrical Tolerance of cast: DIN EN ISO 8062 - grade GCTG 5 5. Application: Waste to energy incineration plants. Garbage disposal is now a very serious global problem. Trash to energy is t...